Valon 5009 Accessories

LMS-1 List Mode Selector Switch and Cable Assembly
The 5009 List Mode preset frequencies are selected using the 5009 USER PORT and any 5-bit switch contact closure.  The 5009 USER port has a weak pull-up current of 80ua to 3.3V.  Alternatively, 3.3V TTL digital logic signals may also be used to control the List Mode at the USER PORT .
 
You can make your own interface to these control lines using the information provided in the 5009 Operations Manual or you can purchase our List Mode Selector Switch and Cable assembly shown below.  S1 is LSB, S5 is MSB.
 
The selector switch mounts with four 3/8" #4-40 standoffs and measures 1.5"x 1.10".  The four 0.125" mounting holes are all 0.120" from any adjacent board edge. The supplied cable is 12" long.  
 
List Mode Selector switch and cable assembly  $49          
Cable assembly only  $12
TTL5009 Serial Cable Assembly
When USB communication is not appropriate or desired, you can connect directly to the 5009 asynchronous 3.3V TTL serial port using this two-wire plus ground pig-tail cable assembly.  See Operations Manual for details on connecting to the User Port.
Cable assembly  $12
PS6V-1 Power Supply Kit
Don't have a power supply for your Valon product?  
Don't want to tie up a bench supply?  
 
This compact 6Vdc, 1Amp power supply is just the solution for conveniently powering any Valon Technology product including our 3010a, 4002, 5009, 5015 and 5019.  The kit includes a power supply module and a 2.1mm power jack to screw-terminal adapter.  
 
Just connect your 2-pin Hirose dc power cable pig-tails (supplied with each of our Valon RF products) to the screw terminals.  You will need a small screw driver and maybe a wire stripper. 
Power supply:
100~240Vac 50/60Hz input.  5.9Vdc @ 1.25A max.  2.1mm power plug. North America only.

Power Jack adapter:
2.1mm power jack to screw-clamping yokes. Can accept wire gauge 12-30  so you know the #24 Valon cable will fit. Terminal spacing is 0.200".  
$23 per kit
Notes:
(1) We do not manufacture these parts, but offer them as a convenience to our customers.
MKT-3 Mounting Kit
For all Valon Technology Frequency Synthesizer Modules
#4-40 x 5/16” mounting screws
#4-40 x 7/16” mounting screws
 washers
$4.00 per kit